waterjet machine
Home   Company   Products   Support  Download   Employment  Contact   Chinese  

 

Model WC5WA1313U specification

The high pressure pump




:

Pump type

dual plunger reciprocal intensifier

Intensifier driven by

hydraulic pump

Max pressure

55,000psi (380Mpa)

Max water flow rate

0.8Gal/min (3.4L/min).

Attenuator

0.35Gal (1.4 Liters)

Cooling method

forced water. Or oil chiller as an option

Hydraulic fluid tank capacity

42Gal (170L)

Power source

3 phase, 380VAC, 50Hz  (or 220V 60Hz), 37kw

Form size

60" x 36"x 55"(1600 x900 x1400mm), weight 1100kg.

Protective automatic shut off under the following circumstances

Over pressure limit

Over temperature limit

Water filter

2 stage filtration included inside the pump unit

 

CNC cutting table

 

The table consists of water tank, X-Y motion system, Z axis motion, cutting head assembly, and abrasive mini-hopper with adjustable abrasive feeding control.

This machine can cut all kinds of metal, marble, granite, glass, ceramic tile, rubber, plastic, virtually any materials. This machine can cut metal up to 100mm thick.

Cutting table(water tank made of stainless steel.)
Style
cantilever
Effective cutting area
4ft x 4 ft (1300x1300mm)
Maximum Z-axis travel
6" (150mm)
X-Y axis motion system
ball screw, linear motion guide
X-Y axis motion drive
AC servo motor
Z axis motion
AC motor with speed reducer.
X-Y axis position repeatability
+/- 0.0016"(0.05mm)
Best cutting tolerance
+/- 0.004" (0.10mm)
Maximum X-Y axis travel speed
32ft/min (10m/min)


Cutting head
waterjet
The assembly consists of pneumatically operated on/off valve and self-aligned cutting head. Maximum Abrasive flow rate:  0.5kg/min (1pound/min).
Compressed air source is necessary. An air compressor is optional item from manufacturer. As an option, the cutting head can manually tilt in both x and y directions.

 

CNC controller

CNC controller consists of advanced industrial grade computer and specialized software running on the Microsoft windows platform. The controller is capable of simultaneous X-Y axis interpolation movement. Fast accelerate or decelerate motion and high speed travel from point to point. Simulation without motion or dry run with axis motion but no jetting of water/abrasive are features included. Error stop and trace repeat are also very useful features. Out of range warning and hard stop to prevent damage capability are embedded in the system. Emergency shut off switch is provided. Remote control is provided to control the motion of  X-Y-Z axis when operator is away from the controller tower.

 

CNC控制柜                                                   

 

Controller Tower                                                       Remote Contro
lController screen:

 

waterjet

 

DXF file compatible:

 

The controller is compatible to dxf file format. Users can save design drawing in .dxf from AutoCAD and read the file into the controller. Controller will post the dxf file to G-code.  The controller can also read G-code generated from other CAM software. Controller software interface is based on Microsoft Windows 98/XP/VISTA. Both metric and British unit versions are available.

 

Advanced CAD/CAM software (optional):  for design drawing, define machine path and lead in/out, nesting, tool offset, and generate G code. Features are similar to AutoCAD, and with rich features of CAM.

 

Automatic abrasive feeder:

 

This equipment is highly recommended for large tables
Requires 70psi pneumatic source
Capacity 40 Gallon.
Self detecting empty/full status of reservoir and start/stop feeding.
Model number ADS-04-170.


Accessories included in standard package
Spare parts kit (optional)
High pressure tubing Including 10 nozzle, 20 orifice, 1 HP seal kit, 1 LP seal kit, 1 HP cylinder, 1 check valve body, 1 check valve repair kit, 1 on/off valve repair kit.
Water hose
Electrical cable
1 pcs nozzle, 2 pcs orifice, 1 tube of blue goop.
1 set of special tools for pump maintenance.